GR2-1\ GR4-1\GR10-1\GR10-1S
Fixed bed up flow regenerate soften valve
Characteristic
1. Several independent valve ports are sealed with ceramic rings, and there are channeling channels between the valve ports;Parts embedded joint, strong maintainability;
2. Meter and timer tow mode,it can be swtch each other by the key
3.In The meter mode,It is set by the water volume at the every station by the inlet flowmeter, and the memory of power outage and water outage,
4.It Can be set the delayed regeneration function;
5.485 Interface, Multi-valve interlock communication, multi-mode output extension,external control input interface;
parameter setting
| LED |
LCD |
Discription |
Formula |
 Twinkle |
B.wash |
Backwash |
Resin filling volume (L) x 100% |
|
Brine |
Brine+Rinse：Liter |
Resin filling volume (L) x 250% |
 |
Clean |
Wash+refill：Liter |
Resin filling volume (L) x 200% |
| RUN |
Soft |
Softening：Ton |
[Resin filling volume (L)x90%] ÷ Raw water hardness (mmol/L) |
Control panel LED Screen
Control panel LCD Screen
Flow process
Series
