DR15¡¢DR20¡¢DR40¡¢DR50

Large valve series floated bed soften valve

Discription

DR20\40\50\20T\40T Soften valve series is floating bed, all appearance and geometric parameters and parts is the same as the corresponding GR20\40\50\20T\40T, floating bed has a good water quality, to adapt high hardness of the raw water, configuration swap tank should be fine and high, runing velocity in the 30-60 m/h, but resin filling rate must be above 90%, being stable working pressure,The floating bed is not suitable for frequent starting and changing water consumption.

Parameter setting£¨Recommended£©

Cycle soft volume£¨ton£©

¡²Filled amount of resin(L)×70%¡³÷raw water hardness£¨mmol/L£©

Brine£¨L£©
20%¡ÁFilled amount of resin(L)
S.Wash£¨L£©
50%¡ÁFilled amount of resin(L)
Wash£¨L£©
50%¡ÁFilled amount of resin(L)
Back Wash£¨L£©
100%¡ÁFilled amount of resin(L)

Flow process

Series

DR15 floated-bed side loading soften valve

Flow rate(max) £º18T/h

IN & OUT G2 ";TOP & BOTTOM 63mmOD;

The drainage outlet 1.5 "

DR20 Floated bed soften valve:

output max:25T/h

IN and OUT is 2 "; TOP & BOTTOM is 63mmOD

The drainage outlet 2 "

DR40 floated bed side loading soften valve:

output max:48T/h

The Mouth nozzle of inlet and outlet is 2.5" or 3" FLANGE ; The Mouth nozzle of Upper and down is 2.5" FLANGE; The drainage outlet is G2"

DR50 floading bed soften valve:

output max:70T/h

Mouth nozzle 3" FLANGE ; The drainage outlet is G2.5"

 

 

DR20/40/50 Touch Screen

Instruction manual (dowmload)